TIME TR100 Plus New surface Roughness Tester

Description

TIME TR100 Plus New surface Roughness Tester

Introduction:
The TIME TR100 Plus new surface roughness tester is designed with an advanced micro-processor, performs data acquisition, data processing and display of all test measurements. This instrument features an integrated process, dual OLED display and sensor, and allows for user selectable roughness units in Ra or Rz. It measures the surface roughness of flat, round and sloping plains. And “new model” measures grooves and recession up to 3.1 x 1.2 in (80 x 30mm).
Features:
– Metal frame, Handheld, Digital – Dual High contrast OLED display – Two parameters Ra and Rz available at the push of a button
– USB output for recharging
– Measurements in both British and Metric unit mode
– Calibration fully adjustable at the key-board on the front
– Protective shield for protecting sensor from damage
– Adjustable cut-off lengths according to ISO / DIN standard
– Measures flat, outer cylinder and sloping surfaces
– Measures metal and non-metal processing parts
– Auto shutdown
Technical Specifications
Roughness parameter
Ra and Rz
Indicator
Dual OLED display
Tracing length
6mm
Pick-up
Piezoelectric
Cut-off lengths
0.25mm/0.8mm/2.5mm
Evaluation length
1.25mm/4.0mm/5.0mm
Measuring range
Ra: 0.05-10.0μm Rz: 0.1-50μm
Accuracy
±15%
Repeatability
<12%
Radius and angle of the stylus point
Diamond, Radius : 10±1μ Angle: 90°(+5°or -10°)
Operating temperature
0-40 ℃
Relative humidity
< 90%
Power supply
3.7V Lithium battery
Dimensions (L×W×H)
116 mm × 86 mm × 20 mm
Weight
200g
Standard delivery:
TR100 Plus main unit together with built-in transducer
Calibration certificate
Roughness standard
Battery charge with USB cable
Instruction manual
Carrying case