TimeBrineller hardness tester with built-in CCD Brinell measuring system

Description

 

TimeBrineller Automatic Brinell Hardness Tester

 

Conforms to:

• ISO6506 Metallic Materials-Brinell Hardness Test
• ASTM E-10 Test Method for Brinell Hardness of Metallic Materials

 

 

Scheme 1  Connect to desktop PC

 

Scheme 2  Connect to laptop PC

 

 

Specification:

• Innovative closed-loop technology. The tester incorporates the latest load cell technology. The test load is applied via a closed-loop control unit with a load cell, a DC motor and an electronic measurement and control unit. The result is highly accurate measurements at all test loads up to 0.5%. The common load overshoot or undershoot as known from traditional dead weight, or open-loop, systems is eliminated. The absence of mechanical weights not only eliminates friction problems but also makes the equipment less sensitive to misalignments caused by vibrations.
• The whole weight of the tester is 50% less than the traditional dead weights type tester.
• Test load selection by keyboard and LCD screen. No need of handling heavy weights or cleaning the messy oil.
• Fully automatic test cycles. The hardness Tester features a fully automatic test cycle, load application, holding, unloading, is performed fully automaticly. This greatly improves reproducibility of test results since operator influence is eliminated.
• Selectable dwell times by screen. The indenter, load, and other test informations are showing clearly on the large LCD screen.

• The directions for 0.102F/D² ratios selecting according to the materials and hardness range can be showing on the screen.

 

 

 

• Equipped with the special Brinell indention measure system which can measure the Brinell indention accurately, quickly, reliably. It is a new measuring method by using CCD camera to capture the indention image, instead of reading diameter from optical microscope by operator then calculating the test value.
• It can connect any PC with USB port and running the SPC software, then the special software supplying simplest operation as following.

 

• Both single testing and batch testing mode are available
• Tolerance setting, distinguishing and alarming
• Statistics values such as Max, Min, Avg, R and S are available

• Convert test result to other scales, such as HRC,HRB,HRA,HV,σb

 

• All test results and indention images are saved automatically
• Test report created in Microsoft EXCEL format, can be edit, copy, print as you will
• Software update freely

 

 

 

 

 

Technical data：

Loads：3000kgf (29400N), 1500Kgf (14700N), 1000Kgf (9800N), 750Kgf（7355N）, 500Kgf (4900N), 250Kgf (2452N), 187.5Kgf (1839N), 125Kgf (1226N), 100Kgf (980N), 62.5Kgf（612.9N) Load dwell duration: 2s～99s, can be set and stored Tungsten Carbide Ball indenter: 10mm Measuring range:  3.18HBW~658HBW Accuracy of indention measureing: ±0.5% Accuracy of Brinell Hardness Value: Hardness Range(HBW) Error (％) Repeatability(％) ≤ 125 ± 2.5 ≤3.0 125＜HBW≤225 ± 2.0 ≤2.5 ＞ 225 ±1.5 ≤2.0 Max measurable height:  200 mm Max measurable depth:  140 mm Dimensions:  530mm×260mm×750mm Power supply:  220/110 V, 50/60 Hz, 4A Weight: 120kg Standard blocks: 125-350HBW10/3000, 125-350HBW10/1000

Standard configuration
	Host machine	1
	Standard block  125-350HBW10/3000	1
	Standard block  125-350HBW10/1000	1
	Ф10mm Tungsten Carbide Ball indenter	1
	Mounting screws for indenter	1
	Screwdriver for indenter mounting	1
	Flat anvil, 80mmx185mm	1
	Software disc
	USB Key	1
	USB Cable	1
	Power supply wire	1
	Dust cover	1
Optional accessories:
	“V ”shape anvil, 80mmx185mm
	Standard blocks of other value
	Ф5mm Tungsten Carbide Ball indenter
	Ф2.5mm Tungsten Carbide Ball indenter
	Ф10mm Tungsten Carbide Ball
	Ф5mm Tungsten Carbide Ball
	Ф2.5mm Tungsten Carbide Ball